Bespoke Worktop Cutting
Home Delivery Terms & Conditions Gallery Contact Us

Worktop Cutting

We cut your worktop for you

Cutting out the holes for hobs and sinks can be a tricky job. Our experienced joiners are at your service to provide a complete bespoke cutting service that will take the headaches out of your fitting.

Whether you are fitting the worktops yourself or using a local tradesman, by using our bespoke cutting service you will save time and money so when you take delivery of your new worktops they are all ready just to be fitted into the kitchen.

Normal Cutting Prices -

Cut Outs
  • Straight Cuts / Cuts to size
  • Hot Rods (Straight Pattern)
    5 x 300mm stainless steel rods
  • Sink Cut-outs
  • Hob Cut-outs
  • Drainer Grooves
£8 per groove
  • Granite inserts 300mm x 300mm
  • Radius Corners
  • Tap Holes
  • Butt Joints prepared for clamps
£40 inc clamps/bolts
  • Edge Profiling
£10 per linear metre
  • Irregular Cut-outs
  • Ellipse End
  • End Caps* fitted
£30 each
  • DIY End Caps
£7.50 each
Pre-oiling service
  • Standard Size Worktops
£10 per/m
  • Breakfast Bars Sizes
£15 per/m

Our pre-oiling service includes 3 coats of Danish Oil applied on all sides of your worktops.

All pre-oiled worktops will require additional 1-2 thin coats of oil after cutting and/or installation.

The underside will not require additional treatment.

We have a range of finishing and maintenance kits and accessories available here.


Bespoke Cutting Sale - for a limited time only

  • Belfast Sink + Draining Grooves - £60.00
  • Belfast Sink + Draining Grooves on both sides - £80.00

Order now to take advantage of this amazing deal

Just call us now on 0800 594 3777 to place your order for worktops and cutting, then all we will need is your detailed kitchen plan to be able to accurately pre-cut your worktops for fitting.

<< Please refer to our CUTTING GUIDE for help on preparing you cutting plans/diagrams >>

* End caps are fitted on the side of the worktop when installed next to range cookers in order to protect the end grain from heath exposure

Site Menu

Worktop Cutting Service © 2009 ~ Site Map